Ref:
Recent investigations into the effectiveness of Drug RDs including their rate of repair and re-repair revealed a marked tendency to quickie Objectives.
Failure to run Objectives fully and completely, especially on a case with an extensive drug history can set up the pc for less than optimum gain on Dianetics. A Drug RD without full and complete Objectives is not a Drug RD.
The easiest and very out tech way to quickie Objectives is to run some commands and then put the pc on the meter and 2WC to F/N or do some fast “rehab.” But did the Objective process ever get run? What actually F/Ned, the Objective or the 2WC? Any Objectives run this way are invalid.
The tech of Objectives is extensive and still very much in force. They have their own EPs and with these they are fully run to actual change for the pc. Only this is valid handling of Objectives.
The way to handle auditors who quickie Objectives is a full W/Cing of the subject and a big clay demo of the purpose of Objectives and a big clay demo of what effect Objectives have on running a Drug RD and R3R. Then get the auditor’s own Objectives flattened.
Any Drug RD that needs to be repaired or redone must include a careful study of the Objectives to see if they were honestly run and if the valid Objective EPs on the processes themselves were obtained. Where the Objective was obviously quickied just R-Factor the pc you are going to flatten it and do so. If the EP of an Objective was questionable you can ask the pc what happened and if he F/Ns on a real Objective EP fine, otherwise flatten the process.
A fully completed Drug RD with Objectives sets the stage for the pc to fly up the Grade Chart so do it right the first time.